1 SPECIFICATION
(a) SLABS: 2400X1200mm up in various thickness over 18mm
(b) CUT-TO-SIZES: 600X600mm / 750X750mm/ 900X900mm... in various appointed sizes
(c) RANDOM STRIPS & SMALL SLABS : thickness over 10mm in length over 1500mm & height over 600mm
(d) SURFACE FINISHES: SAWN / POLISHED / HONED / FLAMED / WATER-JET / SANDBLASTED
WATERJET: a non-slip matt finish, produced by working the surface of the stone with high-pressure water jets.
HONED : a smooth finish with a slight sheen, produced by using a polishing head.
SANDBLASTED: sawn stone slabs are coarsely polished: this removes saw marks and leaves a semi-smooth, regular finish.
FLAMED: the top surface of the slab is burnt off, giving an irregular textured
* TILES: T=3mm,5mm,8mm,10mm,12mm,15mm, Polished/ Beveled/ Calibrated ; Flamed/ Calibrated
300x300x10mm / 12x12x3/8" (305x305x10mm) / 12x12x1/2" (305x305x12mm ) / 12x24x3/8" (305x610x10mm)
400x400x12mm / 16x16x3/8" (400x400x10mm) / 18x18x3/8" (457x457x10mm)
2 QUALITY CONTROL CRITERIA :
POLISHING
Polishing will be uniform throughout the slabs/tiles and in glossometer as:
-- For black slabs / tiles : polishing +95 in glossometer
-- For colored slabs/tiles : polishing +85 in glossometer
FLAMING
Flaming will be uniform throughout the slabs/tiles and brushed evenly on slabs after flaming
THICKNESS
+/- 1.0mm in tolerance for slabs ;+/- 0.5mm in tolerance for tiles
DIAGONAL OUT
+/- 0.5mm in tolerance for tiles
3.PROFILING FOR STRAIGHT CUT & CURVE PANELS:
Polished |
Flamed |
Rebate<3mm |
Rebate>3mm |
R:5mm polished |
JGT_001 | JGT_002 | JGT_003 | JGT_004 | JGT_005 |
R:10mm (<=) |
1/4 Bullnose |
1/2 Bullnose |
Chamfer 5x5mm(<=) |
Chamfer 5x5mm(>) |
JGT_006 | JGT_007 | JGT_008 | JGT_009 | JGT_010 |
Slope+bullnose |
French Edge |
Rebate(<30mm |
Rebate(>30mm |
Double Layer Laminated |
JGT_011 | JGT_012 | JGT_013 | JGT_014 | JGT_015 |
Double Layer Laminated (1/2 bullnose) |
Double Layer Laminated (slope+ bullnose)
|
Cutting Edge |
Cutting angle |
Birdmouth |
JGT_016 | JGT_017 | JGT_018 | JGT_019 | JGT_020 |
Calibrated+1/2 bullnose |
Groove 3~6mm |
Groove 10mmØ |
Groove Sandblasted |
Boat Shape |
JGT_021 | JGT_022 | JGT_023 | JGT_024 | JGT_025 |
4.BLUEPRINTS OF OUR WORKS :
SJT_001 | SJT_002 | SJT_003 | SJT_004 | SJT_005 |
SJT_006 | SJT_007 | SJT_008 | SJT_009 | SJT_010 |
SJT_011 | SJT_012 | SJT_013 | SJT_014 | SJT_015 |
ZKT_001 | ZKT_002 | ZKT_003 |
ZKT_004 | ZKT_005 | ZKT_006 |